: Scientific American Supplement No. 481 March 21 1885 by Various - Science Periodicals Scientific American

@FreeBooks

Posted in: #FreeBooks #FreeBooksIndia #FreeBooksApp #gg

Vote Up Vote Down   0 Reactions

Login to give Reaction!

The Chinese Pump.--1 figure.

The Water Clock.--3 figures.

New Self-propelling and Steering Torpedoes.

Dobson and Barbour's Improvements in Heilmann's Combers.--1 figure.

Machine for Polishing Boots and Shoes.

The Gas Meter.--3 figures.

The Municipal School for Instruction in Watchmaking at Geneva.--1 engraving.

THE RIGHI RAILROAD.

In the year 1864, the well-known geographer, Heinrich Keller, from Zurich, on ascending to the summit of the Righi Mountain, in the heart of Switzerland, discovered one of the finest panoramic displays of mountain scenery that he had ever witnessed. To his enthusiastic descriptions some lovers of nature in Zurich and Berne listened with much interest, and in the year 1865, Dr. Abel, Mr. Escher von der Luith, Aulic Councilor, Dr. Horner, and others, in connection with Keller himself, subscribed money to the amount of 2,000 marks for the purpose of building a hotel on the top of the mountain overlooking the view. This hotel was simple enough, being merely a hut such as is to be found in abundance in the Alps, and which are built by the German and Austrian Alpine Clubs. At present the old hotel is replaced by another and more comfortable building, which is rendered accessible by a railway that ascends the mountain. Mr. Riggenbach, director of the railway works at Olten, was the projector of this road, which was begun in 1869 and completed in 1871. Vitznau at Lucerne is the starting point. The ascent, which is at first gradual, soon increases one in four. After a quarter of an hour the train passes through a tunnel 240 feet in length, and over an iron bridge of the same length, by means of which the Schnurtobel, a deep gorge with picturesque waterfalls, is crossed. At Station Freibergen a beautiful mountain scene presents itself, and the eye rests upon the glittering, ice-covered ridge of the Jungfrau, the Monk, and the Eiger. Further up is station Kaltbad, where the road forks, and one branch runs to Scheideck. At about ten minutes from Kaltbad is the so-called "Kanzli" , an open rotunda on a projecting rock, from which a magnificent view is obtained. The next station is Stoffelhohe, from which the railroad leads very near to the abyss on the way to Righi-Stoffel, and from this point it reaches its terminus in a few minutes. This is 5,905 feet above the sea, the loftiest and most northern point of the Righi group.

The gauge of this railroad is the same as that of most ordinary ones. Between the rails runs a third broad and massive rail provided with teeth, which gear with a cogwheel under the locomotive. The train is propelled upward by steam power, while in its descent the speed is regulated by an ingenious mode of introducing atmospheric air into the cylinder. The carriage for the passengers is placed in both cases in front of the engine. The larger carriages have 54 seats, and the smaller 34. Only one is dispatched at a time. In case of accident, the train can be stopped almost instantaneously.

HIGH SPEED STEAM ENGINE.

The use of rapidly rotating machinery in electric lighting has created a demand for engines running from 400 to 1,200 revolutions per minute, and capable of being coupled directly to a dynamo machine. We have already illustrated several forms of these engines, and now publish engravings of another in which the most noticeable feature is the employment of separate expansion valves and very short steam passages. Many high-speed engines labor under the well-grounded suspicion of being heavy steam users, and their want of economy often precludes their employment. Mr. Chandler, the inventor of the engine illustrated above, has therefore adopted a more elaborate arrangement of valves than ordinarily obtains in engines of this class, and claims that he gains thereby an additional economy of 33 per cent. in steam. The valves are cylindrical, and are driven by independent eccentrics, the spindle of the cut-off valve passing through the center of the main valve. The upper valve is exposed to the steam on its top face, and works in a cylinder with a groove cut around its inner surface. As soon as the lower edge of the valve passes below the bottom lip of the groove, the steam is cut off from the space between it and the main valve, which is fitted with packing rings and works over a latticed port. This port opens directly into the cylinder. The exhaust takes place chiefly through a port uncovered when the piston is approaching the end of its stroke. The remaining vapor left in the cylinder is exhausted under the lower edge of the main valve, until cushioning commences, and the steam from both upper and lower ports is discharged into the exhaust box shown in Fig. 2. The speed of the engine is controlled by a centrifugal governor and an equilibrium valve. This is a "dead face" valve, and when the engine is running empty it opens and closes many times per minute. The spindle on which the valve is mounted revolves with the governor pulley, and consequently never sticks. To prevent the small gland being jammed by unequal screwing up, the pressure is applied by a loose flange which is rounded at the part which presses against the gland. The governor is adjustable while the engine is running.

Free books android app tbrJar TBR JAR Read Free books online gutenberg

(0)

Login to post a comment!